What to do if the nozzle of the Videojet 43S machine is blocked?

First, let’s choose the system: then go down and select a nozzle for cleaning: Then we confirm: Then it will be cleaned: During the cleaning process, we take a cleaning kettle and spray the cleaning solution in the middle of the nozzle: Spray cleaning agent, each cleaning takes approximately one minute/60 seconds. After cleaning, then […]

How to solve the high-voltage fault of Videojet 43S machine?

If our Videojet 43S machine starts up normally, the high voltage fault is reported, which is an overpressure trip. This fault is called an ultra-high voltage trip, also known as a high voltage fault: Then let’s take a look at our side and see if there is ink on the high-pressure deflection plate on this board […]

How to handle the recycling failure of the Weidijie 43S machine?

There are generally two types of recycling failures,One type is nozzle ink core nozzle blockage : Ink line offset caused by nozzle blockage, not entering the recycling tank: Then it leads to a recycling failure. In this case, we need to clean the nozzle. We use the cleaning nozzle software, which includes a cleaning nozzle […]

How to watch Videojet 1000 series High voltage fault explanation?

Firstly, let’s take a look at our high-pressure deflection plate to see if there are any dirty ink or foreign objects on it: If so, we can use a cleaning kettle to clean it thoroughly : After cleaning, we must keep the high-pressure deflection plate dry on top, and make sure to keep it dry […]

How to deal with the failure of Videojet 1000 series machine recovery?

Select nozzle cleaning in the system, and the point is determined: Now cleaning the nozzle: At this time, hold the spray bottle to the middle nozzle control of the nozzle for cleaning, you can see that the cleaning liquid will go back inside, it will clean the nozzle, one side washed, not enough to wash […]

<strong>How to see Videojet 2361  External explanation?</strong>

1、USB joggle 2、Ethernet 3、The Ethernet and the other two holes are used for communication. 4、Encoder 5、Photoelectricity 6、The trachea interface 7、Starter button 8、The red one is an alarm, and the green one is normal. It’s red because there’s no ink cartridge right now. 10、 Screen

<strong>How to see Videojet 2361  External information import?</strong>

After the information is imported into the U disk, it is inserted into the machine. Click Settings, click the data, click the external, select the required information, click this information. Click the lower left corner icon, click “yes” transmission, click “OK”, the transmission is finished. Click Settings, return to the main interface, click this message, […]

<strong>How to see Videojet 2361  The system explains in detail?</strong>

A row of buttons on the left, this is boot, running, offline, input printing and delay. There is no ink cartridge, so the keys are gray, so you can’t press them. “JOB” is the message, the following is the printing message, printing frequency and total count, and then the bottom is the consumption of ink, […]