How to deal with the common faults of the inkjet printer about Videojet 1240 1280 1580:Recovery fault-high voltage fault-poor printing effect?

1. Recycling fault

  • (1)Ink line deviation

If the ink line deviates, adjust the screws.

①Adjust the left and right position of the ink line.

If the upper screw is loose, adjust the lower screw, and the ink line will swing to the position of the recovery tank, and adjust it and lock it.

②Adjust the upper and lower position of the ink line.

If the upper screw is loose, adjust the lower screw, and the ink line will go down or back and forth to the position of the recovery tank. After adjusting it, lock it up.

Note: Fine tuning is enough during the adjustment

(2)Nozzle is blocked

If the nozzle is blocked, clean the nozzle with the cleaning pot.

Click “Clean nozzle” in “Execution Maintenance” to operate according to the video inside.

2.High voltage failure
First take a look at the high pressure deflection plate is dirty.
① If it is dirty, clean it up and blow it dry, with no water
② If it is not dirty, but very wet, blow dry.

3.Printing effect is not good.
If the type of only half of the word, or the effect is not good.
①See if the ink line position deviates.
If the ink line position is wrong, clean the nozzle; after cleaning is still wrong, clean several times, if still wrong, adjust the position of the ink line.
②See ink viscosity.
If the ink line does not deviate, and the nozzle is not blocked, it means that there is a charging problem, and you need to look at the viscosity of the ink.

A)The viscosity is normal.
If the viscosity of the ink is normal, it shows that the ink point division is not good, which can change the voltage and adjust the division of the ink point.

B)The viscosity is not normal
If the ink point is split and the ink means that the ink will deteriorate and the pipe needs to replace the ink.

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “sales@cheef.cn”